B2290
Zenewood
| Item No. | B2290 |
| Material | Bamboo |
| Dimension | 160*160*220MM |
| Finishing | NA |
| Fixing | NA |
| Feature | Modern design |
A desktop metal tissue box holder is a small object that gets looked at all day. This one is formed as a freestanding body, so it stands on the work surface itself — no bracket on the wall, no screws in the desk and no drawer space used up. The pack sits inside and the first sheet pulls through the opening, which keeps the desk line clean and stops the box from reading as a disposable carton.
We build every holder to order in our own sheet-metal workshop and supply it as a wholesale metal tissue box manufacturer, so nothing sits in a warehouse between your confirmation and the production line. That is also why one order can differ from the next: a new colour, a different pack size or a logo on the body is a change to your order rather than a change of product.
It replaces the cardboard box that arrives with the pack. Because the shell is metal, it stays on the desk through pack after pack, the colour can be matched to the room scheme, and a row of them along a reception counter reads as part of the fit-out instead of something improvised.
· Colour as a production choice: you are not tied to a fixed shelf colour, because the finish is applied while your own order is being made.
· Sized around your tissue pack: tell us the cube or upright pack your market buys and the brief is built around that pack, not around a generic box size.
· Refills in seconds: the pack goes in, the first sheet comes through the opening, and housekeeping or front-desk staff can reset the unit between guests and between shifts.
· Compact on the desk: it takes up little more surface than the pack it holds, which suits narrow reception counters, small guest tables and hot-desking positions.
· Quiet in the room: the body carries no printed pattern, so it sits beside the phone, the lamp and the desk tray without competing with them.
· Part of a wider metal range: the same workshop makes the key boxes, storage pieces and desk items that go into the same office or hotel programme, so one supplier covers the room.
The body is formed from sheet metal and closed into shape, which is why a metal tissue box holder from us has a firm outline rather than a soft one. The opening and the edges are worked so that nothing catches on a tissue or on a hand, and the base is made to sit flat on the desk. Weight matters more than it sounds: a metal shell stays where it is put when a tissue is pulled one-handed, while a light tray skates across a polished surface.
Finish is the part buyers ask about most. Colour is applied and checked in our own finishing stage, so we can work to a paint reference, a panel or a sample you send, and we can confirm the sheen you want — matte for a quiet office scheme, or something with more depth for a hotel room. Because the surface is finished rather than printed, it does not lift at the corners the way a wrapped carton does, and a reorder can be matched to the reference you approved the first time.
One boundary worth stating early: this is an indoor desk piece. If the place you have in mind is a terrace, a poolside or a wet room, tell us at the enquiry stage and we will say plainly whether the finish you have chosen suits it.
Product reference | B2290 |
Type | Freestanding desktop tissue box holder |
Construction | Formed sheet metal body |
Finish | Factory-applied colour finish — confirm your colour reference and the sheen you want |
Tissue packs | Built around common cube and upright facial tissue packs — send your pack dimensions to confirm the internal clearance |
Loading | Pack loads through the body or the open base — confirm the loading style for your order |
Base | Made to sit flat on a desk — confirm whether you want protective pads fitted for glass or high-gloss surfaces |
Branding | Logo applied through our OEM/ODM programme — confirm artwork, placement and method |
Packing | Bulk cartons or shelf-ready packs — confirm the packing style and label content for your market |
Supply | Made to order and quoted per project |
· Office desks and workstations: ordered per desk when a floor is kitted out, so a desktop metal tissue box holder for office table placement is uniform across the whole office.
· Reception and front-desk counters: one or two units in the same finish as the counter hardware, where the holder is one of the first things a visitor sees.
· Hotel guest rooms and suites: housekeeping swaps the pack during the room turn and wipes the metal body between guests.
· Meeting and conference rooms: a run of identical holders down a long table looks deliberate and survives daily use by different teams.
· Clinics, dental surgeries and salons: a patient-facing surface that can be cleaned between appointments instead of a cardboard box that has to be thrown away.
· Coworking and serviced offices: standardised desk kits that survive a change of tenant, so the accessories are not replaced at every handover.
1. Set the holder where the pack will be pulled from — the working side of the desk, the reception counter or the guest table — and leave enough clearance for a tissue to come out of the opening.
2. Load the pack through the open base or the lift-off body and draw the first sheet through the opening; ask us to confirm the loading style on your sample so your team refills it the same way every time.
3. Refill when the pack runs out rather than forcing a second one in — the body is made for one pack at a time.
4. Wipe the outside with a soft damp cloth and a little mild detergent as part of the normal desk or room clean.
5. Leave abrasive pads, scouring cream and solvent cleaners in the cupboard; they dull the surface and are the usual cause of marks on units that have been in service for a while.
6. Keep it dry. This is an indoor piece, so it belongs away from direct weather, splashing and wet counters.
7. Store spare units in their cartons in a dry area until they are installed, and handle them by the body rather than the opening when unpacking.
1. Send the brief — where the holder will be used, the tissue pack you buy, your colour reference and any logo artwork — and we will quote it against your quantity.
2. Ask your sales contact about sample availability if you want to handle the body, the opening and the finish before committing to volume.
3. Fix the size, colour and logo before production starts; those three are set at the order stage, and changing them afterwards means a new run.
4. Confirm the quantity you need — the quotation will state the minimum quantity for your chosen size and finish, together with the packing style and carton marking.
5. Confirm the schedule and the terms: lead time runs from order confirmation and approval of the final artwork, and payment and shipping arrangements are agreed with your sales contact.
6. Agree the loading plan and the inspection arrangement before the goods leave, especially where the order ships with other metal items.
7. Keep the approved sample and colour reference on file so a repeat order can be matched to the same finish and the same opening.
Zenewood is a sheet metal products manufacturer based in Jiangmen, China, producing since 2004. Around 200 people cover R&D, design, production and OEM/ODM work, and our integrated manufacturing keeps lead times stable and capacity scalable as your programme grows. Buyers in North America, Australia, Japan, Europe and Southeast Asia come to us for made-to-order projects, so sizes, finishes, branding and packing can be adapted to your market — with quality checked through the batch. Tell us your requirement and our team will quote it.
Will it take the cube tissue packs our office already buys?
It is built around the cube and upright facial tissue packs that offices, hotels and clinics buy in bulk, and the desktop metal tissue box holder for office table format is sized so the pack sits inside rather than balanced on top. Pack formats do vary between markets, so send us the dimensions of the pack you use and we will confirm the internal clearance before the order goes ahead.
Does the finish hold up on a desk that is cleaned every day?
Yes — the body is a finished metal surface rather than a paper wrap, so a daily wipe with a soft damp cloth and mild detergent is all it normally needs. What it does not like is abrasive pads, scouring cream and solvent cleaners, which dull it. Tell us what your cleaning team uses and we will say whether it suits the finish you have chosen.
Can we order it in our own colour with our logo on it?
Yes. Colour and logo work go through our OEM/ODM programme, and because we are a wholesale metal tissue box manufacturer the finish is applied to your own order instead of being picked from a colour shelf. Send the colour reference, the artwork and where the logo should sit, and we will confirm the method and check a sample with you before production.
Will it stay put when someone pulls a tissue one-handed?
A formed metal body carries more weight than a light plastic tray, so it stays where it is placed in normal use. If you are specifying for glass, high-gloss or polished stone desks, ask us to confirm the base and pad details with your order so the surface underneath stays unmarked.
Does it need any fitting or assembly when it arrives?
No. Nothing is drilled, screwed or glued, so the holder is unpacked, placed on the desk and loaded with a pack. On a fit-out that means the units can be positioned as soon as the desks are in and the room has been cleaned.
Can it be used outdoors or on a porch table?
It is an indoor desk piece, so keep it out of direct weather and away from splashing and wet counters. If your project needs an outdoor metal item, tell your sales contact what the setting is and they will point you to a finish that suits it.
