| Quantity: | |
|---|---|
WWT-002
Zenewood
| Item No. | WWT-002 |
| Material | Stainless steel |
| Dimension | 1000*500*775MM |
| Finishing | Matt |
| Fixing | N/A |
| Feature | Durable, anti-rust |
This heavy duty steel workbench table with drawers for garage workshop use gives you a working surface and a tool store in one unit. A flat steel top sits over a bank of drawers, so the hand tools, sockets, measuring gear and consumables that usually end up scattered across a bench live underneath it instead — one footprint in a garage or a workshop bay rather than a bench plus a separate tool cabinet beside it.
We build it to order. As a steel workbench table factory we do not run this unit from stock: the top length and depth, the working height, the drawer layout and the finish are agreed with you before production, and the batch is then built to that specification. That matters most when the bench has to sit inside an existing bench run, match a colour already in your range, or fit a pallet and carton plan you have already fixed.
Day to day it is deliberately simple equipment. The top takes the vice, the parts tray and the job in hand; the drawers hold what the job needs within reach; there is nothing to fold away or set up before work starts. Typical buyers are distributors and dealers extending a garage storage line, e-commerce sellers running their own brand of workshop equipment, and contractors fitting out a workshop or maintenance area.
If what your customer actually needs is storage rather than a work surface, tell us how the end user works and we will point you to the right unit in the range.
· Work surface and storage in one footprint — The drawers sit under the bench rather than beside it, so a single-bay garage or a crowded workshop gains organised tool storage without giving up more floor space.
· Specified for a working environment — This is a heavy duty steel workbench table with drawers for garage workshop use, so the build and the finish are chosen for oil, metal swarf, dropped tools and daily handling rather than for a showroom.
· Sized around your space, not a fixed list — Because the unit is made to order, the top length, top depth and working height are set for the bench run, the service bay or the container plan you are working to.
· Drawers that keep the top clear — Storage directly under the working surface means tools go back into the drawer instead of piling up beside the vice, and the next job starts on a clear top.
· Finish chosen for the market you sell into — Workshop colours, a matte or a gloss look, or a shade matched to the products already in your catalogue; the finish is agreed before production starts.
· Ready for your own brand — Sellers running a private label can have units finished and packed to their own specification under our OEM/ODM work, so the bench arrives as part of your range rather than as a generic import.
Every steel workbench table we build starts with the frame, because that is what decides how the unit behaves after a year of use. The body is fabricated from sheet steel into the frame and the drawer cavity; the worktop is fitted on top as the working surface, and the drawer bank runs inside the cavity beneath it. Because the drawers sit directly under the top, the runners and the drawer faces are the parts that take the daily wear, so they are chosen to suit the load and the frequency of use you describe.
The steel is prepared and finished so the surfaces can be wiped down and kept presentable in a workshop. The exact treatment follows the finish you choose, so confirm finish, colour and sheen against a panel or a sample before the order is placed — particularly if the bench has to stand next to equipment you already supply.
Three details are worth settling early, because each one changes the build: the steel thickness and worktop thickness you want, the number and depth of the drawers, and the working height for the end user. Send those with any drawing or reference photo you have and we will match the build to it.
Clearance is the other point to plan around. An under-bench drawer bank needs enough room in front of the unit for every drawer to pull out fully, and enough space at the side for the person working at the bench, so the footprint you allow for is a little larger than the bench itself.
Property | Detail |
Model reference | WWT-002 |
Product type | Heavy duty steel workbench table with drawers for garage workshop use |
Construction | Steel frame and worktop with an under-bench drawer bank |
Worktop | Steel; thickness set by the build agreed for your order |
Drawer layout | Configured to your requirement |
Working height | Agreed at order to suit the end user and the bench run |
Finish | Workshop finish selected for your market |
Placement | Floor-standing; plan drawer pull clearance and access around the bench |
Assembly | On-site assembly; confirm the fittings included with your sales contact |
Origin | Manufactured in Jiangmen, Guangdong, China |
· Home garage work bay — A homeowner fitting out a single or double garage uses the bench as the main work station and the drawers as the home for hand tools, so the car, the bike and the garden equipment stop sharing a shelf with spanners and screwdrivers.
· Professional repair bay — A technician works at the bench between jobs; sockets, torque tools and consumables live in the drawers below, and everything returns to the same place at the end of a shift instead of travelling between the vehicle and a distant cabinet.
· Fabrication and metalworking corner — Where cutting, filing and fitting happen, the bench gives a stable top for the job and a drawer bank for files, clamps, measuring tools and fixings, kept away from the swarf that collects on the surface.
· Woodworking and assembly shop — Assembly work needs a clear surface and quick access to hand tools; the under-bench drawers keep chisels, drivers and fasteners out of the way of the glue-up or the part being assembled.
· Equipment dealer and showroom floor — Dealers and trade buyers present the bench as part of a garage storage range, and the drawers open to demonstrate the capacity that sells the unit.
· Industrial maintenance workshop — Maintenance teams use the bench as a fixed point in a workshop or plant room; the drawers hold the tools for routine jobs while the top takes the parts being inspected or repaired.
This bench is built for buyers who supply the workshop rather than for a one-off purchase. Importers and distributors of garage and workshop equipment add it to a storage line; equipment dealers and chain stores buy it to sit alongside tool cabinets, trolleys and shelving; e-commerce and private-label sellers take it as part of their own-brand range. Contractors and facilities teams buy smaller volumes to fit out a specific workshop, maintenance bay or vehicle workshop.
What those buyers share is a configuration problem. A top that is slightly too long will not fit the bay a dealer has in mind; a drawer bank that is too shallow will not hold the sockets the end user already owns; a colour that does not match the rest of the range will sit unsold on a showroom floor. That is why we work as a steel workbench table factory rather than as a catalogue seller — the unit that ships is the unit you specified.
This suits buyers who can plan a production order and work from a quotation. It is not the right product for anyone who needs a bench available today, and we will say so rather than take an order we cannot serve well.
1. Send your requirement. Tell us the top length, depth and working height, how the drawers should be divided, the finish, any logo or packaging requirement, the volume you are planning and your destination market.
2. Get a quotation. Pricing is quoted per order because each bench is built to its own configuration. Ask your sales contact to confirm the order quantity terms for this model and the current production lead time at the same time.
3. Ask about a sample or pre-production unit. If you want to check the build, the drawer runners and the finish before committing to volume, ask your sales contact about sample availability and how a first production order is handled.
4. Confirm the order and the terms. Payment terms, shipping terms and the delivery window are agreed with your sales contact for each order, and nothing goes into production until the specification and the terms are confirmed in writing.
5. Production and inspection. Your bench is built to the confirmed specification and checked before it is packed, so the batch matches the approved unit rather than drifting between the first and the last piece.
6. Packing and shipment. Units are packed for export in the way agreed for your order. Confirm the packing method, the shipping terms and the documents you need for your destination with your sales contact before dispatch.
Steel workshop furniture stays serviceable for a long time when a few habits are kept. Wipe the top down after a job rather than letting oil, coolant or metal dust settle on it, and dry the surface if it has been wet — standing moisture is what shortens the life of a finish. Mild detergent and a soft cloth are enough for routine cleaning; abrasive pads and aggressive solvents dull the surface and are not needed.
The drawers are the parts that work hardest. Keep them within the load they were built for, close them rather than letting them slam, and clear swarf and grit out of the runners occasionally with a brush or a vacuum. If a drawer starts to run roughly, stop loading it and speak to your sales contact about the runners before the slide or the drawer face is damaged.
Check the bench over periodically: fixings should stay tight, the top should sit flat, and the unit should remain level on the floor. Treat it as a work surface rather than as a step or a work platform, and keep heavy impacts away from the drawer faces, which are the most vulnerable part of the structure. Where you can, store tools dry — a drawer kept free of damp cloths and wet parts stays in better condition than one used as a catch-all.
Zenewood is a sheet metal products manufacturer based in Jiangmen, China, producing since 2004. Around 200 people cover R&D, design, production and OEM/ODM work, and our integrated manufacturing keeps lead times stable and capacity scalable as your programme grows. Buyers in North America, Australia, Japan, Europe and Southeast Asia come to us for made-to-order projects, so sizes, finishes, branding and packing can be adapted to your market — with quality checked through the batch. Tell us your requirement and our team will quote it.
What sizes can this workbench table be made in?
As a steel workbench table factory we build to the size you specify rather than from a fixed catalogue list. Send us the top length, top depth and working height and we will match the bench to them. If the unit has to fit an existing bench run, a service bay or a container plan, give us that dimension first — the working height then follows the people who will use it, with a top that suits standing work at a vice or a bench-mounted tool.
How many drawers can I specify, and how should they be divided?
The drawer bank is laid out around the tools it will hold. Tell us what the end user keeps in the bench — hand tools in a shallow drawer, sockets and larger items in a deeper one, consumables in a third — and the bank is agreed around that list. Mixed depths usually work better than one uniform stack, because shallow drawers keep small tools visible while the deep ones take the bulky items. Send the split you want with your requirement and we will confirm the layout before production.
How much can the worktop and the drawers carry?
For a heavy duty steel workbench table with drawers for garage workshop use, the build is specified around the load you describe rather than around one standard figure. Tell us what will sit on the top — a vice, an engine part, a gearbox on a stand — and what will go into the drawers, and we will confirm the steel thicknesses and the drawer construction that suit it. That conversation happens before production, so the unit you receive is built for the job rather than loaded beyond what it was specified for.
Can the bench carry our own brand or colour?
Yes. Logo, colour and packaging can all be adapted to your range under our OEM/ODM work, which is how most of our buyers take it. If you are matching a colour already in your catalogue, send the reference or a sample and we will confirm what the workshop finish will look like on the steel before the order is placed.
Where in the workshop should the bench be positioned?
Choose a level floor area, close to the power and lighting the work needs, with clear space in front for the drawers to open fully and clear space at the side for the person working at the bench. Drawer clearance is the detail buyers most often overlook when they plan a garage layout, because a bench set hard against another unit is awkward to use. If it will sit at the end of a longer bench run, tell us and we can match the working height to the units around it.
Can this bench replace a separate tool cabinet?
It can, for the tools the end user needs every day — that is the point of putting the drawers under the working surface. Where the tool collection is larger than the drawer bank, the workshop usually ends up with this bench as the work station and a separate storage unit alongside for the rest, and our range covers tool cabinets if that becomes the better split. Tell us what has to be stored and we will say which combination makes sense.
