| Quantity: | |
|---|---|
TC1503
Zenewood
| Item No. | TC1503 |
| Material | Stainless steel |
| Dimension | 1040*485*9450MM |
| Finishing | Matt |
| Fixing | N/A |
| Feature | Wood Top, with cabinet, 41inch |
Zenewood builds this cabinet to order for workshops, service bays and tool stores. As a wholesale steel tool cabinet supplier we work with distributors, workshop outfitters and equipment dealers, so every unit is manufactured against the specification on the order rather than taken from a shelf — drawer layout, worktop size and finish are all fixed before production begins.
The cabinet pairs a steel body with a wood worktop, so a heavy duty wood top tool cabinet for workshop use keeps the tools and provides the bench at the same time. The drawers hold the tooling; the top is where parts are laid out, checked and assembled.
In daily use this locking tool cabinet is the fixed point of the bay. Tools come out at the start of a job and go back as it finishes, the worktop is free again for the next one, and the end-of-shift routine is short because everything already has a place.
The unit is supplied as model TC1503 and is built to sit at the work station for years of daily handling.
· Drawers close and lock — the lock is what separates a workshop cabinet from open shelving: tools go back in at the end of a shift and are still there at the start of the next one.
· Shared bays — where several fitters use the same area, a locking tool cabinet keeps one person's kit from being mixed with everyone else's and makes it obvious when something has not been returned.
· High-value tooling — torque wrenches, micrometers, diagnostic handsets and calibration kit are the first things a shop puts under lock; closed drawers keep them boxed, protected and out of the way.
· Access between shifts — decide who holds keys before the cabinet is ordered. Tell us how many people need access and we will confirm the key arrangement that suits the unit.
· Spares and replacement — ask your sales contact about spare keys and about what is involved if a key is lost, so a busy bay is not held up waiting on a replacement.
· Fit and reach — the pulls and the lock should sit where a standing operator reaches them naturally. If the cabinet is going into a tight bay, confirm pull and lock placement on the drawing.
Steel quality decides how a cabinet behaves once the drawers are full, which is why we treat this cabinet as load-bearing equipment rather than a storage box. The body has to stay square, the drawers have to run smoothly under weight, and the worktop has to stay flat through years of assembly work. Panels, drawer boxes and the frame are formed and assembled to the drawing approved on your order.
Steel thickness, finish and worktop dimensions are agreed before production starts, so ask us to confirm the specification that matches the load you expect. If you do not have a drawing yet, describe what each drawer has to carry and we will work from that.
The worktop is wood, and that is what makes a heavy duty wood top tool cabinet for workshop use comfortable to work on. It takes the small knocks of assembly work, it will not scratch a part laid on it the way a bare steel surface can, and it stays warm to the touch in an unheated shop. Keep it dry — wipe spills rather than letting them sit — use a mat under blades and sharp fixtures, and do not rest hot parts straight from a grinder on the surface. Ask us what treatment the top carries before you plan any refinishing of your own.
On the steel side, a soft cloth is enough for the body and drawer fronts; abrasive pads dull the finish and leave marks. Colour and finish are set at the order stage, so if the cabinet has to match a fleet colour, a bay marking or existing shop equipment, send the reference with the order.
· Automotive service bay — the cabinet stands at the end of the lift with the bay's hand tools, torque wrenches and diagnostic kit. Locked at night, the bay starts the next morning exactly as it was left.
· Tool crib and shared tooling — where tools are issued to a team rather than kept by one person, this cabinet holds the controlled items under lock and gives the storekeeper a surface to check them on.
· Maintenance and facilities workshop — plant maintenance teams keep spares, pullers and electric hand tools together in one place, and the top doubles as the bench for small rebuilds.
· Fabrication and machine shop — measuring tools and precision tooling live in the drawers beside the machines, while the worktop carries drawings, fixtures and the part being checked. Cover the top if grinding or cutting happens close by.
· Agricultural and equipment dealers — service departments working on tractors, mowers and attachments use the cabinet as the fixed point of the workshop, and a dusty environment makes a closed drawer more valuable, not less.
· Motorsport and race workshops — a fixed cabinet in the awning keeps fast-change tooling in one known place, which matters when several people are working to the same schedule.
· Serious home and hobby workshops — for a buyer who has outgrown a chest of drawers, the lock and the worktop together make this heavy duty wood top tool cabinet for workshop use the centre of the shop rather than another storage box.
1. Send your requirement. As a wholesale steel tool cabinet supplier we quote against a written brief, so tell us where the cabinet will stand, how many people will use it and how many units you need for the first order.
2. Agree the specification on paper. Drawer layout, worktop size, lock arrangement, finish and any branding are confirmed before production, so nothing rests on a photograph or an assumption.
3. Confirm quantity and schedule. Minimum order quantity, lead time and the production slot are quoted per configuration, and your sales contact will confirm them against your order.
4. Agree the packing. Export packing is normal for cabinets of this size; confirm what protection you need for the steelwork, the worktop and the corners on a container load.
5. Settle the commercial terms. Payment terms, Incoterms and the loading port are agreed on the quotation, along with the import documents you need.
6. Plan the receiving end. The cabinet arrives as a packed unit, so check access at the delivery address and have the right handling equipment on site for unloading.
· Drawer layout is built to your brief: the number of drawers, drawer depth and how the fronts are split all come from the order. Send a list of what each drawer has to hold — sockets, spanners, measuring tools, power tools — and we will propose a layout with the heavy items low in the cabinet.
· Cabinet dimensions can be adapted to the bench and bay sizes your market works with. Overall width, depth and height are built to the drawing agreed before production, so the cabinet fits the space instead of the space being planned around the cabinet. Tell us the floor area and the access route, including door widths if the unit has to be moved inside a building.
· Worktop size, thickness and edge treatment are set with the rest of the specification, so the wood surface can match a bench run, a lift position or a parts inspection point. Confirm what the top has to carry and whether it is used for assembly, checking or both.
· Base format is your choice: a fixed base for a station that never moves, or casters where the cabinet has to travel to the job. Tell us how the shop works and we will build the version that fits, rather than selling you mobility you will not use.
· Finish and colour are agreed at the order stage. The steel can be finished to a fleet colour, a bay marking or existing shop equipment; send a colour reference or a physical sample if the match matters.
· Branding and packaging can be adapted for your market. A logo plate, nameplate or printed carton is agreed with your sales contact, so send the artwork files and tell us where the mark should sit and how the units should be packed for your channel.
· Market conventions are part of the brief. Working heights, dimensions and the units your customers use differ between North America, Australia, Japan and Europe, so give us the figures your market expects and, as a wholesale steel tool cabinet supplier, we will build the locking tool cabinet to them.
· A sample can be approved before the first production run, and that unit then becomes the reference for the batch. It is how this cabinet stays consistent from the first unit to the last.
Zenewood is a sheet metal products manufacturer based in Jiangmen, China, producing since 2004. Around 200 people cover R&D, design, production and OEM/ODM work, and our integrated manufacturing keeps lead times stable and capacity scalable as your programme grows. Buyers in North America, Australia, Japan, Europe and Southeast Asia come to us for made-to-order projects, so sizes, finishes, branding and packing can be adapted to your market — with quality checked through the batch. Tell us your requirement and our team will quote it.
Do all the drawers on this locking tool cabinet lock with one key, or can each drawer be locked on its own?
Both arrangements are used in workshops, so the lock is agreed at the order stage rather than assumed. Tell us how many people need access and whether the drawers should all be secured together, and we will confirm the arrangement for your unit before it is built.
Can we change the number of drawers or the size of the cabinet?
Yes. The cabinet is made to order, so drawer count, drawer depth and worktop dimensions come from your brief rather than a stock list. Describe the tools that have to be stored and the floor space you have, and we will come back with a layout.
Can we have our own logo and packaging?
Branding is handled at the order stage. The logo, nameplate and packaging for your market are agreed with your sales contact, together with the artwork files and where the mark should sit, and the details are confirmed on the approved unit before the production run.
Is the cabinet suitable for a damp, dusty or unheated workshop?
It is built for workshop conditions rather than a showroom, and the closed drawers keep dust off the tooling. If the shop is unheated, damp or close to coastal air, tell us about the environment and we will confirm the finish and worktop treatment that suits it.
What is the difference between this cabinet and your roller tool cabinets?
The difference is how the tools move. If the cabinet stays in one bay and the work comes to it, this fixed workshop model is the one to take; if the tools travel with the job, a roller cabinet fits better. We build both, so tell us how your shop works and we will point you to the right model.
